- 軟件大小:2.11M
- 軟件語言:中文
- 軟件類型:國產軟件
- 軟件類別:免費軟件 / 硬盤工具
- 更新時間:2015-08-18 16:31
- 運行環境:WinAll, WinXP
- 軟件等級:
- 軟件廠商:
- 官方網站:http://www.chithemodel.com/
2.99M/中文/10.0
71.50M/中文/0.0
3.57M/中文/10.0
17.13M/中文/5.0
15.33M/中文/4.0
西數硬盤專用修複工具能備份的所有固件,使用WDR首先要將硬盤切換到IDE模式,否則找不到硬盤,可以在winpe下使用,但是不要在要修複的硬盤下打開, 程序放置:c:\work1\wdc 即可運行!
西數硬盤清零工具可以複位smart G轉P表 。
保存ROM文件: Save flash Contents -> ROM.bin file.
寫ROM文件: Write ROM.bin.
保存ROM中固件模塊: Save L ROMFirmware.
寫ROM中固件模塊: Write L ROMFirmware.
重複寫ROM中固件模塊:repeat Write L ROMFirmware.
保存固件模塊: Save L Firmware.
寫固件模塊: Write L Firmware.
重複寫固件模塊: repeat Write L Firmware.
寫單個固件模塊: write SingleModule file to the drive
保存全部磁道鏡像: Save ROYL all reserved cylinders.
寫全部磁道鏡像: write head image files to all reserved cylinders.
寫0磁頭全部磁道鏡像: write L head0 image files to all reserved cylinders.
寫1磁頭全部磁道鏡像: write L head1 image files to all reserved cylinders.
保存硬盤全部文件: Save L ALL SA backups. (ROM、ROMFirmware、Firmware、reserved cylinders)
檢查單個模塊: Check Single Reserved File.
檢查全部模塊: Check All Reserved Files.
初始化硬盤: initialized harddisk.
清除複位SMART: clear smart.
砍磁頭: Head Depop.
內部格式化: Format
改變硬盤容量: capacity change for harddisk
顯示自校流程: show the L SF sequence.
設置自校起始步: change pointer to the L SF.
寫硬盤型號: write L MODEL.
寫硬盤SN號: Write L SN.
查看G表: SHOW L GLIST.
查看GD表: SHOW L GDLIST.
查看P表: SHOW L PLIST.
查看PD表: SHOW L PDLIST.
清除G表: clear L GLIST.
清除GD表: clear L GDLIST.
清除P表: clear L PLIST.
清除PD表: clear L PDLIST.
開始自校: Start SelfTest harddisk.
結束自校: End SelfTest harddisk.
加載LDR: Load Permanent Overlay
製作LDR: Make Permanent Overlay
保存ROM文件: Save flash Contents -> ROM.bin file.
寫ROM文件: Write ROM.bin.
保存ROM中固件模塊: Save L ROMFirmware.
寫ROM中固件模塊: Write L ROMFirmware.
重複寫ROM中固件模塊:repeat Write L ROMFirmware.
保存固件模塊: Save L Firmware.
寫固件模塊: Write L Firmware.
重複寫ROM中固件模塊:repeat Write L Firmware.
保存全部磁道鏡像: Save ROYL all reserved cylinders.
寫全部磁道鏡像: write head image files to all reserved cylinders.
保存硬盤全部文件: Save L ALL SA backups. (ROM、ROMFirmware、Firmware、reserved cylinders)
檢查單個模塊: Check Single Reserved File.
檢查全部模塊: Check All Reserved Files.
初始化硬盤: initialized harddisk.
清除複位SMART: clear smart.
砍磁頭: Head Depop.
內部格式化: Format
改變硬盤容量: capacity change for harddisk
顯示自校流程: show the L SF sequence.
設置自校起始步: change pointer to the L SF.
寫硬盤型號: write L MODEL.
寫硬盤SN號: Write L SN.
解壓密碼:www.chithemodel.com
請描述您所遇到的錯誤,我們(men)將盡快予以修正,謝謝!
*必填項,請輸入內容